The Answer Is a “Short Shaft”　A 43.5-inch driver achieves your desired swing.　Onesider is what you have been looking for.

FUNCTION

A specially designed short shaft for excellent ease of hitting and stability

Using a short shaft for all club numbers shortens the distance between the golfer and the ball, making it easy to hit the ball. This also makes it easier to swing through, improving stability.
■Comparison in shaft length with common clubs
For clubs from the driver to the #7 iron, in particular, we pursue ease of hitting with a thorough short-shaft design.
Developed jointly with Mitsubishi Chemical

The short-shaft design does not simply mean a shorter shaft. This is a specially designed short shaft.

Disadvantages of simply cutting the shaft shorter　(1) Lighter balance. It is difficult to adjust timing.　(2) Less flexible. A slower head speed causes a lower trajectory. ＞ Difficult to swing, resulting in a loss of distance A specialized short-shaft design for the best overall balance of ONESIDER JI+S　(1)   Easy to adjust timing. It is specially designed to be well-balanced despite its short shaft.　(2)   Speed-generating shaft. The shaft easily bends but achieves both grip stiffness and tip flexibility.　＞ Increased carrying distance and hitting rate
This is a specialized design that eliminates excess light balance and excess head weight even for a short shaft. The club easily bends as a whole, with higher grip stiffness to suppress oscillation and tip flexibility to generate head speed, achieving increased carrying distance and a higher trajectory.
A. The tip is hard so that the club is not unintentionally controlled by the large head.　B. The tip is flexible enough to generate head speed.　C. The grip provides a firm feel to increase the hitting rate.

Introduction of a “carbon rail” For DR, FW, and UT

Visually helps stabilize the impact zone.

A carbon rail is used for the crown to easily stabilize the direction toward the target. It visually helps you easily take back straight and follow through straight, improving accuracy and straightness.
Visual effect of the carbon rail
The carbon rail allows you to aim the club straight at the target. It also helps you imagine a more linear swing, improving swing stability. This feature gives a visual effect like a neo-mallet putter.

DRIVER

A short-shaft design with a length of 43.5 inches.

Onesider’s driver is 43.5 inches in length, 2 inches shorter than a common driver. Its length equivalent to a common #3 wood makes the distance to the ball closer, drastically improving stability.

A head structure for an easy and appropriate approach and solid contact.

With a larger face area on the toe than the previous model, this head structure makes the top line look straight despite its hook face with an upright design, achieving an easy and appropriate approach and solid contact.

Straight top line & semi-goose-neck　Stability head shape
An integrated cup face body with rounded face edges. This ensures a stable drive even on off-center hits.
Lightweight with carbon　A deeper center of gravity for easy launch
The use of carbon on the crown and sole makes the body lighter. The produced extra weight is distributed to the toe and heel of the back face to achieve a high moment of inertia. This is a mistake-resistant design.

FAIRWAYWOOD/UTILITY

Pursuing an easy and appropriate approach and solid contact.

Like the driver, the straight top line gives you an easy and appropriate approach, and the semi-goose-neck ensures a solid contact.

A larger difference in shaft length between club numbers.

In addition to the short-shaft design, the difference in shaft length between club numbers is set to be 1.0 inch larger than common FW and UT. You can clearly see the differences in carrying distance depending on the club number.
■Comparison in shaft length between club numbers with
our competitor’s common clubs

A head design for ease of hitting.

The carbon rail helps you imagine a more linear swing, and the carbon crown and all-round sole also deliver a stable trajectory.
Lightweight with a carbon crown　Weight distribution to lower the center of gravity for a higher trajectory
The extra weight produced by the carbon crown is distributed to the sole. This makes the center of gravity lower than the previous model, facilitating an easy launch.
The rounded sole is designed to prevent fat shots.

IRON

Choose an appropriate club number according to the distance of your choice.

The #6 iron focuses on driving performance with a higher loft angle compared with other club numbers. For the #7 and lower irons, the loft is designed for stability, allowing you a specific carrying distance to aim for the green.

Making the length of #6 and #7 closer to that of #8 allows you to hit short-distance shots even with long irons, ensuring increased hitting rate and incomparable stability.

■Comparison in shaft length with common clubs

Striving for stability to reduce mistakes.

The weight is distributed to the toe and heel and the back face. This increases the moment of inertia, achieving a lower and deeper center of gravity. The sole shape with shaved leading edge and trailing edge makes it hard for the club to get stuck and easy to hit out of rough areas.
Maraging steel integrated cup face
High repulsive force in the center part and around the face reduces mistakes even if the ball is not hit on the sweet spot.
Soft stainless-steel integral structure head
Shaped like a flatback. It is resistant to mistakes and puts a spin on the ball.

SPECIFICATION

DRIVER／FAIRWAYWOOD

Club number DRIVER FAIRWAYWOOD
#1 #3 #5
Head volume（㎤） 455 175 163
Loft angle(degrees) 10.5 15 18
Lie angle(degrees) 60.5 59.5 60.0
Club length(inches) 43.5 41.75 40.75
Club weight(g) R 305 323 331
S 307 325 333
Swing weight C8 C9
Head materials [#1] Face＆Body: 6-4Ti　　 Crown＆Sole: Carbon
[#3,5] Face＆Body: Stainless steel　　Crown: Carbon
Shaft
(weight /
torque /
kick point)		 R 50g／torque：3.9°／Low kick-point 51g ／torque：3.5°／Low kick-point （#3）
S 52g／torque：3.9°／Low kick-point 53g ／torque：3.5°／ Low kick-point （#3）
Grip ONESIDER GS ROBBER GRIP M60 47.0g

UTILITY

Club number UTILITY
U4 U5
Club weight(g) 120 119
Loft angle(degrees) 20 24
Lie angle(degrees) 60.5 61.0
Club length(inches) 39.0 38.0
Club weight(g) R 348 359
S 350 361
Swing weight C9
Head materials [U4,5] Face＆Body:Stainless steel　Crown:Carbon
Shaft
(weight /
torque /
kick point)		 R 51g／torque：4.3°／Low kick-point （U4）
S 53g ／torque：4.3°／Low kick-point （U4）
Grip ONESIDER GS ROBBER GRIP M60 47.0g

IRON

Genuine carbon shaft:①ONESIDER JI+S specialized shaft (made by Mitsubishi Chemical)
Steel shaft:②Dynamic Gold 95S200 (made by True Temper)
club number IRON
#6 #7 #8 #9 PW
Loft angle(degrees) 26 32 36 40 45
Lie angle(degrees) 62.5 62.5 62.5 63.0 63.5
club length（inch） ①37.0
②36.75		 ①36.875
②36.625		 ①36.75
②36.5		 ①36.25
②36.0		 ①35.75
②35.5
Club weight(g) ①R 372 375 376 383 391
①S 374 377 378 385 393
②S 410 413 414 421 429
Swing weight ①C9　②D0
Head materials [#6, 7, 8, 9] 450 maraging steel integral structure
[PW] Soft stainless-steel integral structure
Shaft
(weight /
torque /
kick point)		 ①R 52g／torque：3.6°／Low kick-point （#7）
①S 54g／torque：3.6°／Low kick-point （#7）
②S 92g／torque：3.0°／ High-Middle Kick-point （#7）
Grip ONESIDER GS ROBBER GRIP M60 47.0g
club numbers Wedge
AW SW
Loft angle(degrees) 50 56
Lie angle(degrees) 63.5 63.5
club length（inch） ①25.5
②35.25		 ①35.25
②35.0
Club weight(g) ①R 395 401
①S 397 403
②S 433 439
Swing weight ①C9　②D0
Head materials [AW,SW] Soft stainless-steel integral structure
Shaft
(weight /
torque /
kick point)		 ①R 52g／torque：3.6°／Low kick-point （#7）
①S 54g／torque：3.6°／Low kick-point （#7）
②S 92g／torque：3.0°／ High-Middle Kick-point （#7）
Grip ONESIDER GS ROBBER GRIP M60 47.0g

HIKONE FAXTORY MADE IN JAPANの品質

TSURUYA GOLF manufactures original brands at its own factory.
We are pursuing the highest quality clubs
to boost the capability of golfers.

Click here to visit the page of our HIKONE FACTORY